Deye SUN-6K-SG04LP1-AU Hybrid Inverter

Table of Contents

Share

Deye SUN-6K-SG04LP1-AU Hybrid Inverter

Table of Contents

Share

1-Phase 6 kW Hybrid Inverter (48 V, 2 MPPT, WiFi-Ready)

The Deye SUN-6K-SG04LP1-AU is a 6 kW single-phase hybrid inverter designed for Australian homes and small businesses that want a bit more grunt than a standard 5 kW system. It manages solar, batteries and the grid in one unit and is approved to AS/NZS 4777.2 and listed as CEC-approved for use in Australia. 

BSC Renewables can design and install a complete solar-plus-battery system around this inverter, supplying it with a WiFi plug included and set up so you can monitor your system from day one.

At a Glance

When you get this Deye hybrid inverter, you can expect: 

  • 6 kW rated AC output, single phase

     

  • 48 V low-voltage battery (battery voltage range 40–60 V)

     

  • Max battery charge/discharge current: 135 A

     

  • 2 MPPTs, with:

     

    • Max PV input power: 9,000 W

       

    • Max PV access power (oversizing): 12,000 W

       

  • WiFi + RS485/CAN communications; app/web monitoring available

     

  • Up to 16 inverters in parallel, on-grid or off-grid

     

  • 6 time periods for battery charge/discharge scheduling

     

  • IP65 weather protection, <30 dB noise, intelligent air cooling

     

  • CEC-approved and compliant with AS/NZS 4777.2

     

  • Manufacturer warranty up to 10 years, depending on distributor and terms

     

Who Is This Inverter For?

The SUN-6K-SG04LP1-AU is a great fit if you:

  • Have a larger home or high daytime usage (pools, ducted air-con, EV charging, home office).

  • Run a small business or commercial tenancy on single-phase supply and want strong backup and export capacity.

  • Want to maximise self-consumption with room to expand your solar array and battery over time.

It gives a bit more breathing room than a 5 kW unit, without jumping all the way to a three-phase system.

Key Benefits of Deye SUN-6K-SG04LP1-AU

1. Solar, Battery and Grid in One Box

 

As a hybrid inverter, the SUN-6K-SG04LP1-AU handles: 

  1. Solar panels – convert DC from your array to usable AC.

     

  2. Battery – charge from solar (and in some modes, the grid or generator).

     

  3. Grid connection – import when needed, export when allowed.

     

What does this mean for you: 

  • During the day, solar runs your loads first.

     

  • Extra solar charges the battery up to the 135 A limit.

     

  • After sunset, the battery can supply up to 6 kW of power before you draw from the grid.

     

This helps cut power bills and makes better use of the solar you generate.

2. Strong 48 V Battery Performance

 

From the official spec sheet:

  • Battery type: lead-acid or lithium-ion

     

  • Battery voltage range: 40–60 V

     

  • Max charge current: 135 A

     

  • Max discharge current: 135 A

     

  • Battery inputs: 1

     

What that means for your system:

  • Works with a wide range of popular 48 V battery brands used in Australia.

     

  • High charge and discharge current supports faster charging and strong backup power for larger loads.

     

  • Low-voltage battery architecture is well suited to homes and small businesses from a safety and design point of view.

     

3. More Roof Flexibility with Dual MPPTs

 

On the solar side, the inverter offers: 

  • 2 independent MPPT trackers

     

  • Max PV access power: 12,000 W

     

  • Max PV input power: 9,000 W

     

  • MPPT voltage range: 150–425 V

     

  • Max operating PV input current: 13 + 13 A

     

  • Max short-circuit current: 19.5 + 19.5 A

     

  • Strings: 2 (1+1)

     

This lets BSC Renewables:

  • Split panels across two roof orientations (e.g. north/east, north/west).

     

  • Design around partial shade by separating strings.

     

  • Slightly oversize the array so you still get good output in less-than-perfect conditions.

     

4. Smart Time-of-Use Style Control

 

The Deye hybrid series supports six separate time periods for battery charging and discharging. 

This is useful for:

  • Time-of-use tariffs – charge mostly from solar and cheap periods, discharge during peak rates.

     

  • Load shifting – keep expensive evening usage mostly on the battery.

     

BSC Renewables can set these schedules up to match your tariff and routine.

5. Scalable for Bigger Systems

 

The SUN-3/3.6/5/6K-SG04LP1-AU range supports up to 16 inverters in parallel for both on-grid and off-grid systems.

That means you can:

  • Start with one 6 kW inverter now.

     

  • Add more units later if you extend your home, add more air-con, or expand a business site.

     

6. Built for Australian Conditions

 

Deye’s hybrid inverter models in Australia offer: 

  • Operating temperature: –40 °C to +60 °C (with derating above 45 °C)

     

  • Protection rating: IP65 – suitable for outdoor wall mounting

     

  • Noise level: <30 dB

     

  • Altitude: up to 2,000 m

     

  • Grid regulation: AS/NZS 4777.2

     

  • Safety/EMC: IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2

     

So it’s well matched to typical Australian weather and compliance requirements when installed by a licensed solar electrician.

7. Monitoring, WiFi Plug and Connectivity

 

Specs include:

  • Communication interfaces: WiFi, RS485, CAN

     

  • Monitoring options: WiFi, GPRS, Bluetooth, 4G, LAN (via Deye’s ecosystem)

     

  • Front LCD display and status indicators

     

It comes with plug-in WiFi module used for app monitoring. BSC Renewables can supply and configure the WiFi plug as part of your installation, so you can:

  • Check solar production and battery state from your phone.

     

  • See how much you’re importing and exporting.

     

  • Make remote support and troubleshooting easier if needed.

     

8. Safety and Protection

 

The SUN-6K-SG04LP1-AU includes a comprehensive protection suite, including: 

  • DC reverse polarity protection

     

  • AC output over-current and over-voltage protection

     

  • AC output short-circuit protection

     

  • Thermal protection

     

  • DC component monitoring

     

  • Insulation impedance detection and residual-current monitoring

     

  • Ground-fault and earth-fault detection

     

  • Surge protection (Type II on DC and AC)

     

  • DC input switch

     

  • Anti-islanding protection with active frequency shift

     

These help protect your equipment, your property and the grid, provided the system is installed correctly.

Ready to See if This Inverter Suits Your Place?

BSC Renewables designs and installs complete solar and battery systems using quality hardware like the Deye SUN-6K-SG04LP1-AU.

Book a free solar and battery assessment
We’ll look at your energy usage, roof layout and goals, then recommend whether the SUN-6K-SG04LP1-AU is the right inverter for your home or business – or if another model in the Deye range will serve you better.

Ready to go solar?
Let's make it happen.

Discover how easy it is to transform your home & business with energy-efficient solutions. Whether you’re ready to start & just exploring your options, we’re here to guide you every step of the way.
Scroll to Top